Exclusive Multi-Function Five Segment Hybrid Wiper Blade



| Share | |
|---|---|
| Categories | Multifunctional Wiper Blades |
| Brand | SeeVelo |
| Product Specifications | JJ-601N |
| Item Number | JJ-601N |
| Size | 12"-28" / 300mm-700mm |
| Material | Rubber, Plastic, Steel Wire, Iron Parts |
| Temperature Range | -40°C to +80°C |
| Packing | Carton: 50 pcs /ctn.The inner box can be selected |
| Packing By | Carton |
| Durability | 200,000 wipe cycles |

Hybrid Wiper Blade: Frame Pressure, Flat-Blade Profile
This hybrid wiper pairs a steel frame with a five-segment aerodynamic cover. The frame spreads spring pressure across the glass the way a conventional blade does, while the segmented cover keeps the low, flat profile that stops the blade lifting at motorway speed.
The result is a blade that follows strongly curved screens without chatter, clears rain in a single pass and stays quiet from the first sweep. The rubber and the wiper structure are tuned for vehicle windshields, so water is pushed off evenly instead of being smeared back into the driver's line of sight.
Every blade ships with the K4 adapter set, fourteen types from A to G, so the same blade body covers hook, pin, bayonet and side-lock arms and fits 98% of car models on the market.
- Blade Sizes12"-28" / 300-700 mm
- Temperature Range-40°C to +80°C
- Fitment98% of Vehicles
- Packing50 pcs / Carton
Why Distributors Stock This Hybrid Blade
Four points buyers check before the first order: pressure, profile, cold weather and fitment coverage.
Five-Zone Pressure
Five cover segments divide arm pressure into five zones, so the rubber meets the glass evenly on flat and strongly curved screens alike.
Low Wind Profile
The slim segmented cover shields the frame from airflow, keeping the blade planted and quiet at motorway speed.
Cold-Weather Ready
Rubber stays flexible down to -40°C and the cover keeps snow and ice out of the frame, so winter sweeps stay clean.
Fourteen Adapters
The K4 set covers hook, pin, bayonet and side-lock arms, so one blade line fits 98% of vehicles without special tools.
K4 Adapter Set: Fourteen Types, 98% Vehicle Coverage

Types A and B1-B8 handle the hook, push-button and pinch-tab arms found on most Asian, European and American passenger cars. C, D, E, F and G extend coverage to side-lock and bayonet arms, including the wider pin fittings used on later models.
For a distributor the value is SKU discipline: one blade body plus one adapter box replaces a shelf of vehicle-specific part numbers, and slow sizes can be topped up without new tooling. Neutral cartons, OEM packaging and private-label printing are available for buyers who sell under their own brand.
Technical Specifications
- Product Name
- Multi-Function Five-Segment Hybrid Wiper Blade
- Size
- 12"-28" / 300 mm-700 mm
- Material
- Rubber, plastic, steel wire, iron parts
- Temperature Range
- -40°C to +80°C
- Fitment
- 98% of vehicles
- Packing
- Carton, 50 pcs/ctn, inner box optional
- Packing By
- Carton
Fitting the Blade in Four Steps
No drilling and no separate adapter purchase. A driver or workshop technician finishes the swap in about one minute.
- 1
Raise the Arm
Swing the wiper arm clear of the glass until it locks upright.
- 2
Release the Old Blade
Press the locking tab on the worn blade and slide it out of the arm.
- 3
Click In the Adapter
Match the adapter code to the arm, seat it on the blade and push until it clicks.
- 4
Test the Sweep
Lower the arm gently and run one pass to confirm full, quiet contact across the glass.
Need a sample or a wholesale quotation?
Tell us the models you supply and the volumes you move most. We will send back the matching adapter list, the packing configuration and a quotation.
- 加载中···
- Phone
- *Title
- *Content







