Global Partner for Wiper Products & Market Solutions

Home / All / Truck and Bus Wiper Blades

Truck and Bus Wiper Blades

SeeVelo · Truck and Bus Wiper Blades

Truck and Bus Wiper Blades

Heavy-duty wiper blades for trucks, buses and commercial vehicles — four models covering 24"-40" with reinforced frames, U-hook and pin arm fittings for commercial parc, rated from -40 °C to +80 °C. Cartons of 50 pcs, MOQ 500, with OEM, ODM and private label support for fleets and parts channels.

24"–40" lengthsMOQ 500 pcs-40 °C to +80 °COEM / ODM / Private Label

Who we are

Truck and Bus Wiper Blades Manufacturer & Supplier

We are SeeVelo, the wiper brand of Ningbo Zhenhai Jinjian Autoparts Limited Company. We have spent two decades making and exporting wiper blades, wiper arms and rubber strips.

This group is our commercial vehicle range — four models from 24" to 40" (600-1000 mm) with reinforced frames and aerodynamic options, built for the arm loads, screen sizes and duty cycles of trucks, buses and coaches.

A commercial blade works for a living: long strokes, big screens, often two blades on one arm. We build the frame heavy where it carries load and aerodynamic where the speed demands it, and both variants run through the same rail-forming, riveting and inspection line as the passenger range.

SeeVelo wiper blade manufacturing facility
4Truck and bus modelsReinforced, Max Series and aerodynamic tiers
40"Longest blade1000 mm for coach and bus screens
600–1000mm length range24" to 40" in one range
500+MOQ in piecesOEM, ODM and private label from the same line
5 results
ViewShowcase

Engineering

Truck and Bus Wiper Blades Technology and Construction

Six technical decisions separate a wiper blade that survives a market from one that comes back as a claim. Each is a checkable point, not a marketing claim.

Reinforced Frame Construction

Heavy-gauge steel frames with riveted joints sized for commercial arm loads. A truck blade works long strokes at high torque; a passenger frame would flex and lift inside a season.

Aerodynamic Max Series Profile

The Max Series bodies carry a down-force profile for highway speeds — a plain frame lifts off a bus screen at cruise, and the smear band it leaves is a visibility problem, not a cosmetic one.

Hole-Type Frame Option

The Max Series with Hole frame cuts mass and sheds water through the frame — the lighter blade puts less fatigue on the arm spring and motor.

24"-40" Length Range

One length ladder covers rigid trucks at 24"-32" and coaches at up to 40". Mixed parc fleets order the mix, not a model per vehicle.

U-Hook and Pin Commercial Fittings

Commercial arms run U-hook, pin and bayonet fittings, often on parallel twin-blade systems — the range fits the arms the parc actually uses.

Cycle-Life Testing per Model

Rig testing to rated cycle figures at commercial stroke lengths — the duty the blade actually serves, not a passenger-car test borrowed for the label.

Specifications

Truck and Bus Wiper Blades Parameter Quick Reference

Figures taken from the live product records in this group. Ratings are manufacturer-stated — confirm against your own validation plan before printing them on retail packaging.

Item NumberBlade TypeSize RangeWipe CyclesConstruction
JJ-603Reinforced24"–32"200,000Reinforced frame, U-hook commercial fitting
JJ-604TMax Series24"–28"200,000Aerodynamic profile, heavy duty
JJ-604T-HoleMax Series, hole frame24"–28"200,000Hole-type frame, lighter mass
JJ-605Aerodynamic32"–40"200,000Long aerodynamic blade for coach screens

All models specified -40 °C to +80 °C · Carton 50 pcs/ctn, inner box optional

Driving conditions

Truck and Bus Wiper Blades Scenarios by Driving Condition

Seven driving conditions that decide which wiper blade a market should stock. Each one is a different failure mode, so the specification that solves it is different too.

Everyday Driving

Everyday Driving

Family and commuter use, where the priority is a quiet, streak-free wipe and a blade that does not need replacing mid-season.

Recommended: JJ-604T Max Series
High-Frequency Use

High-Frequency Use

Ride-hailing, taxi and commercial vehicles cover high daily mileage, so the blade wears on distance rather than on the calendar.

Recommended: JJ-603 Reinforced — distance duty
Heavy Rain & Highway

Heavy Rain & Highway

At motorway speed the blade has to move far more water per stroke, and aerodynamic lift pulls a poorly profiled blade off the glass.

Recommended: JJ-605 Aerodynamic — holds at cruise
High Temperature

High Temperature

A sun-exposed cabin can pass 70 °C, which hardens ordinary rubber and makes it tacky and noisy. The heat-resistant compound stays stable and quiet.

Recommended: JJ-604T Max Series
Snow Accumulation

Snow Accumulation

Packed snow bridges the frame and lifts the blade off the screen. A booted construction sheds snow and a cold-flexible compound resists cracking.

Recommended: JJ-604T-Hole Max Series
Freezing Conditions

Freezing Conditions

Ice bonds the blade to the glass overnight, and forcing it damages both the rubber and the arm. A cold-flexible edge releases cleanly.

Recommended: JJ-603 Reinforced, cold-flex grade
Sandstorm & Dust

Sandstorm & Dust

Arid regions drive grit into the blade edge, which scratches the glass and wears the rubber fast. Abrion resistance matters more than acoustic performance here.

Recommended: JJ-603 Reinforced

Product lines

Complete Truck and Bus Wiper Blades Product Range

Three constructions across 24"-40" — reinforced for work sites, Max Series for highway, aerodynamic for the longest screens.

Reinforced Truck and Bus Wiper Blades

Reinforced Truck and Bus Wiper Blades

24"-32" with the reinforced frame for rigid trucks and work-site duty — the tier that takes arm torque without flexing.

ModelsJJ-603

Max Series Truck and Bus Wiper Blades

Max Series Truck and Bus Wiper Blades

24"-28" aerodynamic bodies, standard and hole-type frames — the highway tier for coaches and distribution fleets.

ModelsJJ-604T · JJ-604T-Hole

Aerodynamic Truck and Bus Wiper Blades

Aerodynamic Truck and Bus Wiper Blades

32"-40" (800-1000 mm) aerodynamic blades for the largest coach and bus screens, where length and lift meet.

ModelsJJ-605

Production process

In-House Truck and Bus Wiper Blades Production from End to End

Rubber compounding, rail and frame forming, moulding, assembly and inspection all run on our own line — which is why a spec change is a process change, not a supplier negotiation.

01

Precision Rubber Compounding

We compound our rubber in-house to the -40 °C to +80 °C spec, then extrude and cut it to length. Graphite and silicone coatings are applied on the edge, not sprayed over the whole profile.

02

Rail and Frame Forming

We curve cold-rolled steel to the screen radius under controlled tension — rails for beam and hybrid blades, frames for conventional — so the finished blade presses evenly instead of concentrating force at the centre.

03

Moulding & Latch QC

We mould glass-filled polymer adapters and covers, assemble them into the set, and check every one individually for latch engagement before it reaches packing.

04

Assembly and Cycle-Life Testing

We assemble blades onto the rail or frame, then sample them to the wipe-cycle rig. The results set the rated figure carried on the product record.

05

Seven-Step Final Inspection

Our material, in-process and final checks cover rubber hardness, rail curvature, latch fit, cover seating, length tolerance, packing count and carton labelling.

Cooperation

Tailored Truck and Bus Wiper Blades Solutions for Every Business Model

Four cooperation models, all from a 500 pcs MOQ. Samples are drawn from the closest existing model — sample and bulk lead times are quoted per project because they move with the length mix and packaging format.

OEM / ODM cooperation icon

OEM / ODM

We build to your specification and brand, or you choose an existing model and we apply your branding, packaging and length mix. Both routes start from a requirement brief.

Best forBrand owners and importers holding their own catalogues
Private Label cooperation icon

Private Label

Your carton, your inner box, your cover print. Artwork approval is a gate — printing does not start until it is signed off.

Best forDistributors building a house brand
In-Stock Supply cooperation icon

In-Stock Supply

Standard models ship from stock in cartons of 50 pcs with optional inner boxes, at a 500 pcs MOQ.

Best forJobbers and e-commerce sellers testing the category
Fleet & Programme cooperation icon

Fleet & Programme

Length mixes sized to the parc you actually serve, with long-life grades for accounts that replace on condition.

Best forRental, ride-hailing, taxi and car-sharing fleets

Compliance

Global Certifications & Compliance for Wiper Blade Buyers

ISO 9001 quality management, product compliance documentation, vehicle fitment coverage data and registered patents — the certificates behind every wiper blade order.

SeeVelo quality certification document 1
SeeVelo quality certification document 2
SeeVelo quality certification document 3
SeeVelo quality certification document 4
SeeVelo quality certification document 5
SeeVelo quality certification document 6
SeeVelo quality certification document 7

Product knowledge

Truck and Bus Wiper Blades Product Knowledge

Three guides that answer the questions buyers ask before they order a wiper blade range.

How to Spec a Truck and Bus Wiper Blade

How to Spec a Truck and Bus Wiper Blade

Start from the arm — U-hook, pin or bayonet, and whether the vehicle runs twin parallel blades — then measure each blade end to end. Rigid trucks typically run 24"-32"; coaches reach 40". Highway duty favours the aerodynamic Max Series; site duty the reinforced frame.

Why Commercial Blades Lift at Speed

Why Commercial Blades Lift at Speed

A plain frame is a wing at coach cruise speed: the airflow lifts it off the screen and the blade smears exactly when the driver needs the view. The Max Series and aerodynamic profiles add down-force so contact holds at speed.

Twin-Blade Systems and How to Order for Them

Twin-Blade Systems and How to Order for Them

Many trucks and buses run two parallel blades of different lengths on one system. Measure both, order the pair as a mix — our MOQ and carton logic take length mixes, not single lengths, so the fleet order matches the vehicle.

FAQ

Frequently Asked Questions About Truck and Bus Wiper Blades

The questions distributors, brands and fleets ask most often about truck and bus wiper blades.

Are truck wiper blades different from car blades?

Yes — longer (24"-40"), heavier framed for the arm loads, and fitted to commercial U-hook and pin arms. A passenger blade on a truck flexes, lifts and wears out fast; the commercial range is built for the stroke and torque the vehicle actually runs.

Can I order mixed lengths for a fleet parc?

Yes — orders take length mixes across the range, so one order covers the rigid trucks at 24"-32" and the coaches at 40". Tell us the parc and we will build the mix.

Q. What size wiper blades do I need for my car?

Measure the existing blade end to end and round to the nearest inch, on both sides — the Truck and Bus Wiper Blades range covers the common lengths for the arms it fits. Check the product list by vehicle brand if you are unsure.

Q. Why do my new wiper blades streak and smear?

Three usual causes: protective film on a new rubber edge, a contaminated screen, or an arm that no longer presses evenly. Clean the screen, wipe the edge, then check contact before returning the blade.

Q. How do I install wiper blades step by step?

Match the adapter to the arm on the car, click the adapter onto the arm, then push the blade onto the adapter until it latches. Lower the arm gently onto the glass — never let it snap back.

Q. Are silicone wiper blades really better than rubber ones?

Silicone resists UV and temperature cycling better, so it lasts longer in hot, high-UV markets and leaves a water-repellent film as it wipes. In temperate climates a standard natural rubber edge already reaches its rated cycle life — choose by market, not by rank.

Q. How long do wiper blades actually last?

Our standard models are rated 200,000 wipe cycles. Real life is shorter under UV, heat and grit; fleets typically replace on condition rather than on the calendar.

Q. How can buyers reduce returns caused by fitment mistakes?

Ship with a fitment chart keyed to arm type and length, confirm brand + model + year at the counter, and standardise on one adapter system so one blade covers the parc.

Q. How much does wiper blade replacement cost?

At trade level the price is driven by rubber grade, frame or rail quality and packaging — not by length. Ask for a landed cost per 1,000 wipe cycles and compare that instead of unit price.

Get a quote

Ready to Partner with a Truck and Bus Wiper Blade Manufacturer?

Send us the vehicle types in your fleet parc, the arm fittings and the length mix. We will reply with the matching truck and bus wiper blade models, MOQ options and a sample plan.