
Everyday Driving
Family and commuter use, where the priority is a quiet, streak-free wipe and a blade that does not need replacing mid-season.
Recommended: JJ-730 Excellence flatSeeVelo · Flat Wiper Blades
Frameless beam wiper blades in 12"-28" with a pre-curved one-piece spring rail and a multi-adapter fitting set for J-hook, pin, bayonet, pinch-tab and side-pin arms. Rated 200,000 wipe cycles from -40 °C to +80 °C, in cartons of 50 pcs. Supplying distributors, brands and fleets worldwide with OEM, ODM and private label support.
Who we are
We are SeeVelo, the wiper brand of Ningbo Zhenhai Jinjian Autoparts Limited Company. We have spent two decades making and exporting wiper blades, wiper arms and rubber strips.
This group is our frameless beam blade range — seven models in 12"-28" (300-700 mm), built on a one-piece pre-curved spring steel rail with a low-profile aerodynamic profile and a multi-adapter fitting set that covers the arm types a market actually uses.
Because the rail is formed in-house on our own line, a flat blade from us is a single controlled assembly rather than a bought-in frame with a blade on it. That is what keeps curvature, pressure distribution and cycle life consistent between a 500 pcs trial order and a 50,000 pcs programme.

Engineering
Six technical decisions separate a wiper blade that survives a market from one that comes back as a claim. Each is a checkable point, not a marketing claim.
The beam rail is a single length of cold-rolled spring steel, pre-curved to the screen radius. With no frame joints to work loose, pressure stays even across the arc — the root cause of end-of-stroke streaking on worn blades.
No exposed frame means no lift at motorway speed and nowhere for snow to bridge. The profile presses the blade onto the glass at speed, which is where a conventional frame starts to smear.
The wiping edge stays flexible in European winter and resists hardening under Middle East summer heat. Graphite-coated and silicone-coated grades are available where quieter running or water beading matters.
Each blade ships with glass-filled polymer adapters for J-hook, pin, bayonet, pinch-tab and side-pin arms — one SKU per length instead of a connector variant per model.
Every adapter is checked individually for latch engagement before packing. A loose latch is the most common cause of a blade detaching in service and the most expensive return in this category.
Every flat model is rig-tested and carries its own rated 200,000-cycle figure rather than one blanket claim borrowed from the range.
Specifications
Figures taken from the live product records in this group. Cycle-life and temperature ratings are manufacturer-stated — confirm against your own validation plan before printing them on retail packaging.
| Item Number | Blade Type | Size Range | Wipe Cycles | Construction |
|---|---|---|---|---|
| JJ-750 | Durable | 12"–28" | 200,000 | Reinforced beam rail for hard duty |
| JJ-730 | Excellence | 12"–28" | 200,000 | Premium rubber grade, low-profile beam |
| JJ-710D | Third-generation basic | 12"–28" | 200,000 | Updated beam profile and adapter set |
| JJ-710-2 | Second-generation basic | 12"–28" | 200,000 | Proven rail profile, multi-adapter |
| JJ-710 | Basic | 12"–28" | 200,000 | Entry beam blade, multi-adapter |
| JJ-708N | ProLine | 12"–28" | 200,000 | Professional grade rail and edge |
| JJ-708H | Classic | 12"–28" | 200,000 | Long-running catalogue beam blade |
All models specified -40 °C to +80 °C · Carton 50 pcs/ctn, inner box optional
Driving conditions
Seven driving conditions that decide which wiper blade a market should stock. Each one is a different failure mode, so the specification that solves it is different too.

Family and commuter use, where the priority is a quiet, streak-free wipe and a blade that does not need replacing mid-season.
Recommended: JJ-730 Excellence flat
Ride-hailing, taxi and commercial vehicles cover high daily mileage, so the blade wears on distance rather than on the calendar.
Recommended: JJ-750 Durable flat
At motorway speed the blade has to move far more water per stroke, and aerodynamic lift pulls a poorly profiled blade off the glass.
Recommended: JJ-750 Durable flat, silicone grade
A sun-exposed cabin can pass 70 °C, which hardens ordinary rubber and makes it tacky and noisy. The heat-resistant compound stays stable and quiet.
Recommended: JJ-730 Excellence heat-resistant grade
Packed snow bridges the frame and lifts the blade off the screen. A booted construction sheds snow and a cold-flexible compound resists cracking.
Recommended: Flat beam sheds snow by design
Ice bonds the blade to the glass overnight, and forcing it damages both the rubber and the arm. A cold-flexible edge releases cleanly.
Recommended: Any flat model, cold-flex compound
Arid regions drive grit into the blade edge, which scratches the glass and wears the rubber fast. Abrion resistance matters more than acoustic performance here.
Recommended: JJ-750 Durable flatProduct lines
Three flat wiper blade tiers share one adapter system and one 12"–28" length ladder — a distributor stocks one depth per length, not one SKU family per tier.

The reinforced beam rail for hard duty cycles — high-mileage fleets, hot climates and markets that replace on condition rather than on the calendar.
ModelsJJ-750

Premium rubber grade on the low-profile beam for buyers who judge a blade by noise and streak-free sweep. The retail-facing step-up SKU.
ModelsJJ-730

The volume line: Classic, Basic, second and third-generation bodies plus the ProLine professional grade. One depth per length covers the whole entry tier.
ModelsJJ-710 · JJ-710-2 · JJ-710D · JJ-708H · JJ-708N
Production process
Rubber compounding, rail and frame forming, moulding, assembly and inspection all run on our own line — which is why a spec change is a process change, not a supplier negotiation.
We compound our rubber in-house to the -40 °C to +80 °C spec, then extrude and cut it to length. Graphite and silicone coatings are applied on the edge, not sprayed over the whole profile.
We curve cold-rolled steel to the screen radius under controlled tension — rails for beam and hybrid blades, frames for conventional — so the finished blade presses evenly instead of concentrating force at the centre.
We mould glass-filled polymer adapters and covers, assemble them into the set, and check every one individually for latch engagement before it reaches packing.
We assemble blades onto the rail or frame, then sample them to the wipe-cycle rig. The results set the rated figure carried on the product record.
Our material, in-process and final checks cover rubber hardness, rail curvature, latch fit, cover seating, length tolerance, packing count and carton labelling.
Cooperation
Four cooperation models, all from a 500 pcs MOQ. Samples are drawn from the closest existing model — sample and bulk lead times are quoted per project because they move with the length mix and packaging format.

We build to your specification and brand, or you choose an existing model and we apply your branding, packaging and length mix. Both routes start from a requirement brief.
Best forBrand owners and importers holding their own catalogues
Your carton, your inner box, your cover print. Artwork approval is a gate — printing does not start until it is signed off.
Best forDistributors building a house brand
Standard models ship from stock in cartons of 50 pcs with optional inner boxes, at a 500 pcs MOQ.
Best forJobbers and e-commerce sellers testing the category
Length mixes sized to the parc you actually serve, with long-life grades for accounts that replace on condition.
Best forRental, ride-hailing, taxi and car-sharing fleetsCompliance
ISO 9001 quality management, product compliance documentation, vehicle fitment coverage data and registered patents — the certificates behind every wiper blade order.







Product knowledge
Three guides that answer the questions buyers ask before they order a wiper blade range.

Start with the arm end: J-hook, pin, bayonet, pinch-tab or side-pin decides which adapter clicks on. Then measure the old blade end to end and round to the nearest inch — 12" to 28" on the front, and the driver and passenger sides are often different lengths. The multi-adapter set shipped with each blade covers the five common arm types.

A flat beam blade has no exposed frame, so it resists lift at speed, sheds snow instead of bridging it, and looks the part on modern screens. A conventional framed blade is cheaper and still fits older arms directly. Most ranges stock both: flat as the volume and premium line, conventional for the older parc.

The rail carries the arm's spring force to the edge. If it is straight or unevenly curved, the blade contacts harder in the middle and streaks at the ends. We form the rail to the screen radius under controlled tension, so pressure stays even across the swept arc — check the contact pattern, not just the cycle-life figure.
FAQ
The questions distributors, brands and fleets ask most often about flat wiper blades.
On modern curved screens, yes: an even-pressure beam wipes cleaner, resists aerodynamic lift at speed and does not collect snow in the frame. On older flat screens and some pin arms a conventional blade is still the practical choice. Stock both and let the vehicle decide.
They fit any arm in the adapter set — including pin and bayonet arms on older vehicles. The adapter, not the blade body, is what matches the arm, which is why we ship the full five-adapter set with every length.
Measure the existing blade end to end and round to the nearest inch, on both sides — the Flat Wiper Blades range covers the common lengths for the arms it fits. Check the product list by vehicle brand if you are unsure.
Three usual causes: protective film on a new rubber edge, a contaminated screen, or an arm that no longer presses evenly. Clean the screen, wipe the edge, then check contact before returning the blade.
Match the adapter to the arm on the car, click the adapter onto the arm, then push the blade onto the adapter until it latches. Lower the arm gently onto the glass — never let it snap back.
Silicone resists UV and temperature cycling better, so it lasts longer in hot, high-UV markets and leaves a water-repellent film as it wipes. In temperate climates a standard natural rubber edge already reaches its rated cycle life — choose by market, not by rank.
Our standard models are rated 200,000 wipe cycles. Real life is shorter under UV, heat and grit; fleets typically replace on condition rather than on the calendar.
Ship with a fitment chart keyed to arm type and length, confirm brand + model + year at the counter, and standardise on one adapter system so one blade covers the parc.
At trade level the price is driven by rubber grade, frame or rail quality and packaging — not by length. Ask for a landed cost per 1,000 wipe cycles and compare that instead of unit price.
Get a quote
Send us the arm types in your market, the length mix you sell and your packaging requirement. We will reply with the matching flat wiper blade models, MOQ options and a sample plan.
