
Everyday Driving
Family and commuter use, where the priority is a quiet, streak-free wipe and a blade that does not need replacing mid-season.
Recommended: JJ-002 / JJ-003 assembliesSeeVelo · Rear Wiper Arm & Blades
Complete rear wiper arm and blade assemblies for specific vehicle makes — the arm and blade arrive as one pre-fitted unit, currently covering Toyota and Mitsubishi applications, rated from -40 °C to +80 °C. Cartons of 50 pcs, MOQ 500, with OEM, ODM and private label support.
Who we are
We are SeeVelo, the wiper brand of Ningbo Zhenhai Jinjian Autoparts Limited Company. We have spent two decades making and exporting wiper blades, wiper arms and rubber strips.
This group is our complete rear arm and blade range — arm and blade supplied as one assembly, currently for Toyota (JJ-002) and Mitsubishi (JJ-003) applications, with further makes under development.
A worn rear wiper is often the arm, not the blade: the spring weakens and the pivot corrodes, and no replacement blade fixes a arm that no longer presses. Supplying the assembly — arm, blade, fittings — as one part number is the repair the market actually needs, and the assembly is built and tested on our own line.

Engineering
Six technical decisions separate a wiper blade that survives a market from one that comes back as a claim. Each is a checkable point, not a marketing claim.
Arm and blade arrive as one unit with the mounting hardware. One part number, one fitting step — no separate arm, blade and clip SKUs to reconcile.
Each assembly is engineered for the make's rear wiper mount, sweep angle and screen — the fitment is designed, not adapted from a universal part.
The arm holds the blade at the designed pressure across the whole sweep. A weak arm spring is the hidden cause of most 'bad blade' complaints on rear screens.
The pivot and mounting hardware are treated against road salt and car-wash chemicals — corrosion at the pivot is what turns a two-year arm into a scrap part.
The blade edge carries the standard compound and -40 °C to +80 °C rating — the assembly wipes like a new car part, because it is one.
Each assembly is rig tested to its rated cycle figure, arm and blade together, as the unit it ships as.
Specifications
Figures taken from the live product records in this group. Ratings are manufacturer-stated — confirm against your own validation plan before printing them on retail packaging.
| Item Number | Blade Type | Size Range | Wipe Cycles | Construction |
|---|---|---|---|---|
| JJ-002 | For Toyota | Arm 9"/225 mm, blade 8"/200 mm | 200,000 | Complete arm + blade assembly |
| JJ-003 | For Mitsubishi | Arm 9"/225 mm, blade 8"/200 mm | 200,000 | Complete arm + blade assembly |
All models specified -40 °C to +80 °C · Carton 50 pcs/ctn, inner box optional
Driving conditions
Seven driving conditions that decide which wiper blade a market should stock. Each one is a different failure mode, so the specification that solves it is different too.

Family and commuter use, where the priority is a quiet, streak-free wipe and a blade that does not need replacing mid-season.
Recommended: JJ-002 / JJ-003 assemblies
Ride-hailing, taxi and commercial vehicles cover high daily mileage, so the blade wears on distance rather than on the calendar.
Recommended: JJ-002 / JJ-003 assemblies
At motorway speed the blade has to move far more water per stroke, and aerodynamic lift pulls a poorly profiled blade off the glass.
Recommended: JJ-002 / JJ-003 assemblies
A sun-exposed cabin can pass 70 °C, which hardens ordinary rubber and makes it tacky and noisy. The heat-resistant compound stays stable and quiet.
Recommended: JJ-002 / JJ-003 assemblies
Packed snow bridges the frame and lifts the blade off the screen. A booted construction sheds snow and a cold-flexible compound resists cracking.
Recommended: JJ-002 / JJ-003 assemblies
Ice bonds the blade to the glass overnight, and forcing it damages both the rubber and the arm. A cold-flexible edge releases cleanly.
Recommended: JJ-002 / JJ-003 assemblies
Arid regions drive grit into the blade edge, which scratches the glass and wears the rubber fast. Abrion resistance matters more than acoustic performance here.
Recommended: JJ-002 / JJ-003 assembliesProduct lines
One assembly per make — arm, blade and fittings as a single part number.

The complete Toyota rear assembly: 9"/225 mm arm with the 8"/200 mm blade pre-fitted, mounted with the designed hardware.
ModelsJJ-002

The Mitsubishi counterpart: same 9" arm and 8" blade, engineered for the Mitsubishi rear wiper mount.
ModelsJJ-003
Production process
Rubber compounding, rail and frame forming, moulding, assembly and inspection all run on our own line — which is why a spec change is a process change, not a supplier negotiation.
We compound our rubber in-house to the -40 °C to +80 °C spec, then extrude and cut it to length. Graphite and silicone coatings are applied on the edge, not sprayed over the whole profile.
We curve cold-rolled steel to the screen radius under controlled tension — rails for beam and hybrid blades, frames for conventional — so the finished blade presses evenly instead of concentrating force at the centre.
We mould glass-filled polymer adapters and covers, assemble them into the set, and check every one individually for latch engagement before it reaches packing.
We assemble blades onto the rail or frame, then sample them to the wipe-cycle rig. The results set the rated figure carried on the product record.
Our material, in-process and final checks cover rubber hardness, rail curvature, latch fit, cover seating, length tolerance, packing count and carton labelling.
Cooperation
Four cooperation models, all from a 500 pcs MOQ. Samples are drawn from the closest existing model — sample and bulk lead times are quoted per project because they move with the length mix and packaging format.

We build to your specification and brand, or you choose an existing model and we apply your branding, packaging and length mix. Both routes start from a requirement brief.
Best forBrand owners and importers holding their own catalogues
Your carton, your inner box, your cover print. Artwork approval is a gate — printing does not start until it is signed off.
Best forDistributors building a house brand
Standard models ship from stock in cartons of 50 pcs with optional inner boxes, at a 500 pcs MOQ.
Best forJobbers and e-commerce sellers testing the category
Length mixes sized to the parc you actually serve, with long-life grades for accounts that replace on condition.
Best forRental, ride-hailing, taxi and car-sharing fleetsCompliance
ISO 9001 quality management, product compliance documentation, vehicle fitment coverage data and registered patents — the certificates behind every wiper blade order.







Product knowledge
Three guides that answer the questions buyers ask before they order a wiper blade range.

If the new blade still streaks, skips or lifts, the arm has lost its spring tension or the pivot has corroded — the blade was never the problem. An arm-and-blade assembly replaces both failure modes in one part.

A universal blade fits the arm; a vehicle-specific assembly fits the vehicle. The mount, sweep angle and pressure are engineered for the make, so the installation is a bolt-on rather than an adaptation.

Release the old arm at the mount, fit the new assembly on the splined or bolted mount, torque the fastener, and test one sweep. No adapter selection, no blade-to-arm fitting — the part arrives as the unit the car expects.
FAQ
The questions distributors, brands and fleets ask most often about rear wiper arm & blades.
Because rear wiper complaints are usually arm complaints: weakened spring tension or a corroded pivot that no blade can fix. The assembly replaces the whole wear item set in one part number, and the fitting time drops to a single step.
The programme is active — Toyota and Mitsubishi ship now, and additional makes follow the same route: engineered mount, rated cycle life, one part number. Tell us the parc you serve and we will scope it.
Measure the existing blade end to end and round to the nearest inch, on both sides — the Rear Wiper Arm & Blades range covers the common lengths for the arms it fits. Check the product list by vehicle brand if you are unsure.
Three usual causes: protective film on a new rubber edge, a contaminated screen, or an arm that no longer presses evenly. Clean the screen, wipe the edge, then check contact before returning the blade.
Match the adapter to the arm on the car, click the adapter onto the arm, then push the blade onto the adapter until it latches. Lower the arm gently onto the glass — never let it snap back.
Silicone resists UV and temperature cycling better, so it lasts longer in hot, high-UV markets and leaves a water-repellent film as it wipes. In temperate climates a standard natural rubber edge already reaches its rated cycle life — choose by market, not by rank.
Our standard models are rated 200,000 wipe cycles. Real life is shorter under UV, heat and grit; fleets typically replace on condition rather than on the calendar.
Ship with a fitment chart keyed to arm type and length, confirm brand + model + year at the counter, and standardise on one adapter system so one blade covers the parc.
At trade level the price is driven by rubber grade, frame or rail quality and packaging — not by length. Ask for a landed cost per 1,000 wipe cycles and compare that instead of unit price.
Get a quote
Tell us the vehicle makes and volumes you serve. We will reply with the matching rear arm and blade assemblies, the development route for new makes, MOQ options and a sample plan.
