Global Partner for Wiper Products & Market Solutions

Home / All / Conventional Wiper Blades

Conventional Wiper Blades

SeeVelo · Conventional Wiper Blades

Conventional Wiper Blades

Classic framed wiper blades in 12"-28" with a riveted steel frame, quality rubber edge and U-hook or pin fittings — six models from economy to heavy-duty, rated 200,000 wipe cycles from -40 °C to +80 °C. Cartons of 50 pcs, MOQ 500, with OEM, ODM and private label support for distributors, brands and fleets worldwide.

MOQ 500 pcs200,000 wipe cycles-40 °C to +80 °COEM / ODM / Private Label

Who we are

Conventional Wiper Blades Manufacturer & Supplier

We are SeeVelo, the wiper brand of Ningbo Zhenhai Jinjian Autoparts Limited Company. We have spent two decades making and exporting wiper blades, wiper arms and rubber strips.

This group is our classic framed blade range — six models in 12"-28" (300-700 mm), from the economy JJ-405K to the reinforced JJ-812, each built on a riveted steel frame with pressure points matched to the screen and a quality natural rubber edge.

A conventional blade is still the workhorse of the aftermarket: direct fit on older arms, easy to inspect, and the lowest landed cost per blade. We keep the whole frame, rivet, spring and rubber process on our own line so a tier change is a specification change — not a negotiation with a frame supplier.

SeeVelo wiper blade manufacturing facility
6Conventional modelsEconomy, entry, heavy-duty and reinforced tiers
4Pressure points per frameDistributed load across the swept arc
200KWipe-cycle ratingRated across the whole conventional range
500+MOQ in piecesOEM, ODM and private label from the same line
6 results
ViewShowcase

Engineering

Conventional Wiper Blades Technology and Construction

Six technical decisions separate a wiper blade that survives a market from one that comes back as a claim. Each is a checkable point, not a marketing claim.

Riveted Steel Frame Construction

The frame is cold-rolled steel assembled with riveted joints, not spot-welded sheet. Rivets keep their tension after a season of vibration; welded tabs are what work loose and chatter on a cheap blade.

Four-Point Pressure Distribution

The frame presses the blade onto the glass through four contact points matched to the screen radius. Even pressure is what prevents the centre-streak and end-lift patterns buyers return blades for.

Rubber Compound for -40 °C to +80 °C

A quality natural rubber edge that stays flexible in freezing rain and does not go tacky in cabin heat. Graphite-coated grades run quieter on dry glass.

Anti-Corrosion Frame Finish

Frames are coated before assembly so the joints, not just the visible bars, resist road salt and car-wash chemicals — corrosion at a pressure point is what kills an otherwise good blade.

Direct U-Hook and Pin Fittings

The U-hook and pin fittings click straight onto the arms of the older vehicles this range serves — no adapter matrix to stock, no fitment call to field.

Cycle-Life Testing per Model

Every model is wipe-cycle rig tested and carries its own rated 200,000-cycle figure, from the economy tier to the reinforced tier.

Specifications

Conventional Wiper Blades Parameter Quick Reference

Figures taken from the live product records in this group. Cycle-life and temperature ratings are manufacturer-stated — confirm against your own validation plan before printing them on retail packaging.

Item NumberBlade TypeSize RangeWipe CyclesConstruction
JJ-812Stable12"–28"200,000Balanced frame for steady contact
JJ-409Reinforced12"–28"200,000Strengthened frame joints and levers
JJ-408Rugged12"–28"200,000Heavy-gauge frame for hard duty
JJ-405CHeavy-Duty12"–28"200,000Upgraded rubber and frame grade
JJ-406Entry-level12"–28"200,000Cost-engineered frame, quality edge
JJ-405KEconomy12"–28"200,000Volume tier for price-led markets

All models specified -40 °C to +80 °C · Carton 50 pcs/ctn, inner box optional

Driving conditions

Conventional Wiper Blades Scenarios by Driving Condition

Seven driving conditions that decide which wiper blade a market should stock. Each one is a different failure mode, so the specification that solves it is different too.

Everyday Driving

Everyday Driving

Family and commuter use, where the priority is a quiet, streak-free wipe and a blade that does not need replacing mid-season.

Recommended: JJ-406 Entry-level
High-Frequency Use

High-Frequency Use

Ride-hailing, taxi and commercial vehicles cover high daily mileage, so the blade wears on distance rather than on the calendar.

Recommended: JJ-409 Reinforced
Heavy Rain & Highway

Heavy Rain & Highway

At motorway speed the blade has to move far more water per stroke, and aerodynamic lift pulls a poorly profiled blade off the glass.

Recommended: JJ-408 Rugged
High Temperature

High Temperature

A sun-exposed cabin can pass 70 °C, which hardens ordinary rubber and makes it tacky and noisy. The heat-resistant compound stays stable and quiet.

Recommended: JJ-405C Heavy-Duty
Snow Accumulation

Snow Accumulation

Packed snow bridges the frame and lifts the blade off the screen. A booted construction sheds snow and a cold-flexible compound resists cracking.

Recommended: Winter Wiper Blades group
Freezing Conditions

Freezing Conditions

Ice bonds the blade to the glass overnight, and forcing it damages both the rubber and the arm. A cold-flexible edge releases cleanly.

Recommended: Heated Wiper Blades group
Sandstorm & Dust

Sandstorm & Dust

Arid regions drive grit into the blade edge, which scratches the glass and wears the rubber fast. Abrion resistance matters more than acoustic performance here.

Recommended: JJ-409 Reinforced

Product lines

Complete Conventional Wiper Blades Product Range

Three conventional tiers, one 12"–28" length ladder — economy for price-led shelves, heavy-duty for hard duty, reinforced for the premium step.

Economy and Entry-Level Conventional Blades

Economy and Entry-Level Conventional Blades

The volume tiers: JJ-405K and JJ-406 carry the same quality rubber edge on a cost-engineered frame — the lowest landed cost per blade in the catalogue.

ModelsJJ-405K · JJ-406

Heavy-Duty and Rugged Conventional Blades

Heavy-Duty and Rugged Conventional Blades

Upgraded rubber and heavier-gauge frames for commercial duty and hot markets: JJ-405C and JJ-408 hold contact where a standard frame starts to skip.

ModelsJJ-405C · JJ-408

Reinforced and Stable Conventional Blades

Reinforced and Stable Conventional Blades

The premium step: JJ-409 reinforces the joints and levers, JJ-812 balances the frame for the steadiest sweep — the tier for buyers who replace on condition.

ModelsJJ-409 · JJ-812

Production process

In-House Conventional Wiper Blades Production from End to End

Rubber compounding, rail and frame forming, moulding, assembly and inspection all run on our own line — which is why a spec change is a process change, not a supplier negotiation.

01

Precision Rubber Compounding

We compound our rubber in-house to the -40 °C to +80 °C spec, then extrude and cut it to length. Graphite and silicone coatings are applied on the edge, not sprayed over the whole profile.

02

Rail and Frame Forming

We curve cold-rolled steel to the screen radius under controlled tension — rails for beam and hybrid blades, frames for conventional — so the finished blade presses evenly instead of concentrating force at the centre.

03

Moulding & Latch QC

We mould glass-filled polymer adapters and covers, assemble them into the set, and check every one individually for latch engagement before it reaches packing.

04

Assembly and Cycle-Life Testing

We assemble blades onto the rail or frame, then sample them to the wipe-cycle rig. The results set the rated figure carried on the product record.

05

Seven-Step Final Inspection

Our material, in-process and final checks cover rubber hardness, rail curvature, latch fit, cover seating, length tolerance, packing count and carton labelling.

Cooperation

Tailored Conventional Wiper Blades Solutions for Every Business Model

Four cooperation models, all from a 500 pcs MOQ. Samples are drawn from the closest existing model — sample and bulk lead times are quoted per project because they move with the length mix and packaging format.

OEM / ODM cooperation icon

OEM / ODM

We build to your specification and brand, or you choose an existing model and we apply your branding, packaging and length mix. Both routes start from a requirement brief.

Best forBrand owners and importers holding their own catalogues
Private Label cooperation icon

Private Label

Your carton, your inner box, your cover print. Artwork approval is a gate — printing does not start until it is signed off.

Best forDistributors building a house brand
In-Stock Supply cooperation icon

In-Stock Supply

Standard models ship from stock in cartons of 50 pcs with optional inner boxes, at a 500 pcs MOQ.

Best forJobbers and e-commerce sellers testing the category
Fleet & Programme cooperation icon

Fleet & Programme

Length mixes sized to the parc you actually serve, with long-life grades for accounts that replace on condition.

Best forRental, ride-hailing, taxi and car-sharing fleets

Compliance

Global Certifications & Compliance for Wiper Blade Buyers

ISO 9001 quality management, product compliance documentation, vehicle fitment coverage data and registered patents — the certificates behind every wiper blade order.

SeeVelo quality certification document 1
SeeVelo quality certification document 2
SeeVelo quality certification document 3
SeeVelo quality certification document 4
SeeVelo quality certification document 5
SeeVelo quality certification document 6
SeeVelo quality certification document 7

Product knowledge

Conventional Wiper Blades Product Knowledge

Three guides that answer the questions buyers ask before they order a wiper blade range.

How to Choose Conventional Wiper Blades by Arm and Length

How to Choose Conventional Wiper Blades by Arm and Length

Check the arm first — most older vehicles take a U-hook or pin fitting that clicks straight onto this range. Then measure the old blade end to end, both sides, and round to the nearest inch between 12" and 28". Tier comes last: economy for price-led shelves, heavy-duty where the duty is hard.

Conventional vs Flat Wiper Blades: Which Sells Better

Conventional vs Flat Wiper Blades: Which Sells Better

Conventional framed blades are the price anchor and still fit the older parc directly; flat beam blades take the modern curved screens and the premium shelf. A balanced range carries both so the counter never turns a customer away.

What Makes a Conventional Blade Chatter

What Makes a Conventional Blade Chatter

Usually lost joint tension or corrosion at a pressure point, not the rubber. That is why we rivet the frame and coat it before assembly — check that the levers still pivot freely and the frame sits square before replacing the blade.

FAQ

Frequently Asked Questions About Conventional Wiper Blades

The questions distributors, brands and fleets ask most often about conventional wiper blades.

Are conventional wiper blades still worth stocking?

Yes — the older vehicle parc is huge and price-led, and conventional blades are the lowest landed cost per unit with direct U-hook and pin fittings. Stock them alongside a flat or hybrid line so every arm that walks in leaves with a blade.

Which conventional tier should I start with?

Start with the economy JJ-405K or JJ-406 for volume shelves, then add the heavy-duty JJ-405C/JJ-408 tier if your market runs hot or commercial. The reinforced JJ-409 and JJ-812 come in when you have accounts that replace on condition.

Q. What size wiper blades do I need for my car?

Measure the existing blade end to end and round to the nearest inch, on both sides — the Conventional Wiper Blades range covers the common lengths for the arms it fits. Check the product list by vehicle brand if you are unsure.

Q. Why do my new wiper blades streak and smear?

Three usual causes: protective film on a new rubber edge, a contaminated screen, or an arm that no longer presses evenly. Clean the screen, wipe the edge, then check contact before returning the blade.

Q. How do I install wiper blades step by step?

Match the adapter to the arm on the car, click the adapter onto the arm, then push the blade onto the adapter until it latches. Lower the arm gently onto the glass — never let it snap back.

Q. Are silicone wiper blades really better than rubber ones?

Silicone resists UV and temperature cycling better, so it lasts longer in hot, high-UV markets and leaves a water-repellent film as it wipes. In temperate climates a standard natural rubber edge already reaches its rated cycle life — choose by market, not by rank.

Q. How long do wiper blades actually last?

Our standard models are rated 200,000 wipe cycles. Real life is shorter under UV, heat and grit; fleets typically replace on condition rather than on the calendar.

Q. How can buyers reduce returns caused by fitment mistakes?

Ship with a fitment chart keyed to arm type and length, confirm brand + model + year at the counter, and standardise on one adapter system so one blade covers the parc.

Q. How much does wiper blade replacement cost?

At trade level the price is driven by rubber grade, frame or rail quality and packaging — not by length. Ask for a landed cost per 1,000 wipe cycles and compare that instead of unit price.

Get a quote

Ready to Partner with a Conventional Wiper Blade Manufacturer?

Send us the arm types and length mix you sell, the tiers your market needs and your packaging requirement. We will reply with the matching conventional wiper blade models, MOQ options and a sample plan.