Global Partner for Wiper Products & Market Solutions

Home / All / Hybrid Wiper Blades / Pro Performance Universal Three Segment Hybrid Wiper Blade

Pro Performance Universal Three Segment Hybrid Wiper Blade

Pro Performance Universal Three Segment Hybrid Wiper Blade
Pro Performance Universal Three Segment Hybrid Wiper BladePro Performance Universal Three Segment Hybrid Wiper Blade
Share
CategoriesHybrid Wiper Blades
BrandSeeVelo
Product SpecificationsJJ-603N
Item NumberJJ-603N
Size12"-28" / 300mm-700mm
MaterialRubber, Plastic, Steel Wire, Iron Parts
Temperature Range-40°C to +80°C
PackingCarton: 50 pcs /ctn.The inner box can be selected
Packing ByCarton
Durability200,000 wipe cycles
Detail Information

Pro Performance Universal Three Segment Hybrid Wiper Blade

Designed for vehicles on the market that use a U-hook attachment. High-quality rubber blades and an optimized three-segment structure conform closely to the windshield, clearing rainwater quickly and evenly in wet conditions to keep the driver's view clear.

  • 12" – 28" / 300 – 700 mm
  • U-hook attachment
  • Three-segment structure
  • -40°C to +80°C
Signature universal three segment hybrid wiper blade, full view on white background

Four advantages built into the blade

Wipes clean, streak-free

Uniform edge pressure removes water in one pass, reducing water streaks and residue left on the glass.

Adapts to the windshield

The blade fits well and adapts to the various curvatures of modern windshields, keeping full contact across the whole sweep.

Resistant to wear and aging

High-quality rubber with a reinforced structure stands up to heat, cold and UV exposure, ensuring a longer service life.

Installs like a normal blade

Compatible with vehicle models that use a U-hook attachment. No special tools and no modification to the vehicle, just a normal blade replacement.

Five segment hybrid wiper blade spoiler shell and wiping edge detail

Why the three-segment design clears better

Water is cleared on the first pass, because pressure stays even from one end of the blade to the other.

On a worn or poorly matched blade, water is dragged into a thin film instead of being cleared away. Streaks and residue stay on the glass, and visibility drops exactly when the driver needs it most.

This blade closes that gap. An aerodynamic shell presses a resilient rubber edge against the glass, so rainwater is cleared at any speed.

Close-up of the three segment wiper blade center joint

What the hybrid construction includes

  • Natural rubber wiping edgeConforms closely to the glass for a clean, quiet sweep
  • Aerodynamic spoiler shellKeeps the blade pressed to the windshield at speed
  • Spring steel and iron partsHold the blade curve and distribute pressure evenly
  • Plastic fittingsResist wear and aging through seasons of daily use

Everything ships assembled — the blade mounts straight onto a U-hook arm.

Installation

No special tools and no modification to the vehicle. A normal blade replacement onto a U-hook arm.

Step 1
Remove the old blade

Lift the wiper arm away from the glass, press the release tab and slide the old blade off the U-hook.

Step 2
Clip on the new blade

Hook the new blade onto the U-hook arm and push until it clicks into place.

Step 3
Lower and test

Return the arm to the glass and run one wipe to confirm a clean, streak-free sweep.

Engineering detail

Rubber
High-quality natural rubber wiping edge
Frame and fittings
Steel wire, iron parts, plastic fittings
Attachment
U-hook wiper arms
Sizes
12"–28" / 300–700 mm
Temperature range
-40°C to +80°C
Packing
Carton: 50 pcs /ctn. The inner box can be selected

Need pricing or a sample?

Tell us the models you serve and the volumes you move most. We will come back with the full specification, the packaging configuration and a quotation.

Review
  • 加载中···
Please send your message to us
*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.