Global Partner for Wiper Products & Market Solutions

Home / All / Spraying Wiper Blades / Good-Value Multi functional Spraying Wiper Blade

Good-Value Multi functional Spraying Wiper Blade

Good-Value Multi functional Spraying Wiper Blade
Good-Value Multi functional Spraying Wiper BladeGood-Value Multi functional Spraying Wiper BladeGood-Value Multi functional Spraying Wiper BladeGood-Value Multi functional Spraying Wiper BladeGood-Value Multi functional Spraying Wiper Blade
Share
CategoriesSpraying Wiper Blades
BrandSeeVelo
Product SpecificationsJJ-806
Item NumberJJ-806
Size12"-28" (300mm-700mm)
MaterialRubber, plastic, steel wire, iron parts
Temperature Range-40°C to +80°C
PackingCarton: 50 pcs /ctn, inner box optional
Packing ByCarton
Durability300,000 wipe cycles
Detail Information

Good-value Universal Spraying Wiper JJ-806

Washer fluid leaves the blade itself. It travels from the vehicle’s original washer pipe into the wiper, then out through holes moulded along the rubber edge and onto the glass as a mist. The fluid is already where the rubber meets the glass, so the whole sweep is cleaned on the first pass.

  • JJ-806
  • 12"– 28" / 300 – 700 mm
  • Fits 98% of vehicles
  • Teflon-coated rubber
JJ-806 good-value spraying wiper blade, single product view

Four decisions built into the blade

01

Fluid leaves the blade, not the hood

A mist is released along the whole wiping edge instead of from two or three fixed nozzles, so the full sweep of the glass is cleaned in one motion.

02

Good-value build, made in our own factory

Developed and produced in our own plant, so the spraying function arrives at a standard-blade price with the same Teflon-coated rubber, air deflector and thickened spring steel.

03

Teflon-coated rubber rated to 300,000 cycles

Teflon-coated rubber with an air deflector, thicker spring steel and POM plastic parts, tested to stay durable after 300,000 wipe cycles.

04

One adapter range, 12" to 28"

The multi-adapter system plus a 300 mm to 700 mm length range covers 98% of the car models on the road, with no change to the original arm.

Close-up of the spray holes moulded into the JJ-806 wiper rubber

How the fluid reaches the glass

On a conventional wiper the jets sit on the hood or the cowl panel. Fluid lands in a few fixed spots, the blade drags it across dry glass, and the result is smearing, wasted fluid and a short moment of poor visibility.

The spraying wiper closes that gap. Fluid runs from the vehicle’s original pipe into the blade and leaves through precisely moulded holes along the rubber. Because it is already at the wiping edge, it spreads exactly where the rubber meets the glass.

One wiper, 98% of the vehicles on the road

Tell us your car model, year and arm type and we will confirm the adapter and the length.

Adapter chart for the JJ-806 spraying wiper: C-A, XB1, B1 to B16, C and H

Adapter codes included in the JJ-806 range: C-A, XB1, B1–B16, C, H

JJ-806 spraying wiper parts kit: washer tubing, straight joint, tee joint, clips and cable ties

What arrives with each blade

  • 1.5 m washer tubingMain run from the original pipe
  • 2 × 0.7 m washer tubingOne piece to each blade
  • Straight jointJoins the original pipe to the 1.5 m tube
  • Tee jointSplits the line to the left and right blades
  • Mounting clips and cable tiesRoutes the line and secures the hose run

Installation

No special tools and no modification to the vehicle. A normal blade replacement plus one connection to the washer line.

Connect to the original pipe

Find the washer pipe, then join it to the 1.5 m tube with the straight joint.

Split the line

The tee joint sends fluid down the two 0.7 m tubes, one towards each side of the glass.

Mount and connect

Clip the blades onto the arms with the matching adapters and push the 0.7 m tubes onto each blade.

JJ-806 spraying wiper installation guide showing the five fitting steps

The full five-step sheet supplied with every blade.

Engineering detail

Rubber
Teflon-coated rubber with air deflector
Frame and fittings
Thickened spring steel, POM plastic parts, iron fixings
Durability
Tested to 300,000 wipe cycles
Adapter range
C-A, XB1, B1–B16, C, H (20 adapters)
Length range
12"– 28" / 300 – 700 mm
Packing
Carton: 50 pcs /ctn. The inner box can be selected

Need pricing or a sample?

Tell us the models you serve and the volumes you move most. We will come back with the full specification, the packaging configuration and a quotation.

Review
  • 加载中···
Please send your message to us
*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.